The safe use of silent generator is an important prerequisite for ensuring stable operation of equipment and avoiding accidents. Here are some basic rules for the safe use of silent generators:
1、 Preparation before operation
Before using a silent generator, it is necessary to conduct a comprehensive inspection of the equipment to ensure that all components are installed securely, connected correctly, and free from damage or abnormalities. At the same time, it is necessary to check whether the supply of cooling water, engine oil, and fuel is sufficient, and whether the oil level is within the normal range. In addition, it is necessary to check whether all instruments on the dashboard are intact, whether the battery is fully charged, and whether the wiring of the generator is correct and the grounding wire is in good condition.
2、 Start and Run
When starting the silent generator, the operating procedures should be strictly followed. The time for starting the motor should not exceed 15 seconds. If it fails to start once, it should be restarted after an interval of 1-2 minutes. After the diesel engine is ignited, the throttle should be immediately reduced, the idle state should be maintained, the oil pressure should be observed, and there should be no oil leakage, water leakage or abnormal noise. Normal operation can only be resumed when the water temperature reaches 60 ℃.
During normal operation, it is important to closely monitor the operating status of the generator, such as whether parameters such as water temperature, oil pressure, voltage, frequency, etc. are within the normal range. If any abnormalities are found, the machine should be stopped immediately for inspection and troubleshooting before continuing to operate. At the same time, it is necessary to avoid idling and idling for a long time to prevent damage to the equipment.
3、 Shutdown and maintenance
When stopping the silent generator, the electrical load should be removed first, then the throttle lever should be pushed to a small position, and the parking lever should be pulled forward to turn off the diesel engine. After shutdown, the fuel tank switch should be turned off, the equipment should be cleaned, and necessary maintenance work should be carried out.
In order to maintain the good condition of the silent generator, regular maintenance and upkeep of the equipment should be carried out. This includes changing engine oil, cleaning filters, checking fasteners, etc. At the same time, the generator should be regularly tested and inspected to ensure that it is always in good working condition.
The safe use of silent generator requires strict adherence to operating procedures and maintenance requirements. Only in this way can we ensure the stable operation of the equipment and extend its usage time.
